Description

Accessories:
Rear Gear Box Mounts 2pcs
Aluminum Front Knuckles Inner Part 2pcs
Aluminum Front Knuckle Outer Case 2pcs
Rear Axle Joint 2pcs
Rear Axle Shaft 2pcs
Spindle Gear 2pcs
Stainless Steel Round Head Screw 3x18 4pcs
Stainless Steel Round Head Screw 3x16 2pcs
Stainless Steel Round Head Screw 3x14 2pcs
Stainless Steel Round Head Screw 3x12 2pcs
Stainless Steel Cap Head Screws 2.5x16 4pcs
Stainless Steel Flat Head Screw 2.5x10 6pcs
3x6x2 Alloy Collar 6pcs
Stainless Steel Cap Head Screws 2.5x8 4pcs
Stainless Steel Cap Head Screws 2.5x10 12pcs

Major advantages of upgrading to this part/product :
1. Made with a quality light weight high tensile strength aluminum 6061 T6 for greater support and durability.
2. The connection with knuckle arms has an open design for convenient assembly.
3. The position of dampers are modified after the installation of this product. Original installation: the dampers sit in a vertical position. Modified installation: the dampers sit slightly outward. This is to enhance the stability of the vehicle and allow adjustment on the height of dampers.
4. The knuckle arm design has changed by increasing the internal gear, pitch, diameter and lowering the center position of the axle to increase the height of the body by 1.2mm. Further enhance the overall performance.

Other special notes and comments:
Suitable for all TRX-4 models.
Due to the increased diameter of the knuckle arms, GPM Racing # TRX4023, TRX4023A, TRX4023B, TRX4023C, TRX4023X, TRX4023XL (pendulum wheels) are not suitable to use with this set.

---

You may also like